HID CORPORATION
Cardprinters en Cards
HID FARGO DTC1500
Technical specs
- Dual-sided printing
- Single-sided or dual-sided lamination module
- Smart card encoding modules (contact/contactless)
- Magnetic stripe encoding module
- Print Method: Dye Sublimation / Resin thermal transfer
- Print Speed: 16 seconds per card / 225 cards per hour (YMCKO)
- Accepted Card Sizes: CR-80 ; CR-79
- Print Area: edge-to-edge
- Card capacity: 100 card input, up to 100 card output
- Memory: 32 MB RAM
- Interface USB 2.0, Standard Ethernet with internal print server
- Dimensions Printer: 9.8″ H x 18.7″ W x 9.2″ D
- Supply Voltage 100-240Vac, 50-60Hz, 1.6 Amps max
- Security: Custom watermark overlay, data protection, password-protected printer, data encryption on the printer over a secure network.
HID FARGO DTC1250e
Technical specs
- Dual-Sided Printing
- No Lamination(optional)
- Print area: Edge to Edge
- Connectivity: USB
- Print method: Direct to Card
- Rfid ready print
- Weight: 7.5
- Dimensions: 18.7 x 7.9 x 9.2 inches
- Input Size: CR 80 and CR 79, 9-40 mils
- Speed: YMCKO – 225 cph, YMCKOK – 150 cph
- Input Hopper: 100
- Output Hopper: 100
- Card Volume: Medium
- No Magnetic Stripe Encoding(optional if needed)
- No Smart Card Encoding(optional)
- No Prox Card Encoding(optional)
HID FARGO DTC4250E
Technical specs
- Side Printing: Single or dual
- Print Method: Dye-sublimation / resin thermal transfer
- Print Speed: 16 seconds per card / 225 cards per hour (YMCKO)
- Data protection: AES-256 encryption on the printer over a secure network
- Card capacity: 100 card input, 100 card output, 100 card reject with same-side input/output hopper
- Single-wire Ethernet and USB 2.0 interface for inline printing and encoding (only available for iCLASS® and contact smart card encoding)
- Wireless connectivity with Wi-Fi® accessory (on Ethernet-enabled printers)
- Password protection on the printer
- Eco-friendly erase and rewrite feature
- SmartScreen graphical display
- Optional same-side input/output card hopper – field upgradeable
- Smart card encoding (contact/contactless) – field upgradable
- Magnetic stripe encoding – field upgradeable
- Accepted Card Sizes: CR-80
HID FARGO HDP5000
Technical specs
- Sided Printing: Single or Dual
- Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
- Print Speed: up to 24 seconds per card / 150 cards per hour (YMC with transfer)
- Accepted Card Sizes: CR-80
- Card Lamination Module: single/dual- Upgradable
- Smart card encoding- Upgradable
- Door and cartridge locks
- Magnetic stripe encoding – Upgradable
- 200 card input hopper – Upgradable
- Dual-sided printing – Upgradable
iCLASS Cards
MIFARE Classic or
MIFARE DESFire EV1 + Prox
Available with proximity, magnetic stripe,
contact smart chip, PVC or composite card body.
Embeddable & iCLASS Prox
Embedded Card
iCLASS Card with or without 125 kHz HID
Proximity and an Optional Contact Smart Chip
Module.
MIFARE Classic or
MIFARE DESFire EV1
Available with magnetic stripe, contact smart
chip, PVC or composite card body.
13.56 MHz iCLASS Smart Card with 125 kHz HID
Proximity.
Multi-technology smart card solution with
iCLASS and HITAG2 for migration to iCLASS SE
platform
Smart card for direct Image & thermal transfer
High durability 13.56 MHz Contactless Smart
Card
For environments where legacy iCLASS reader technologies are in place and an upgrade to advanced, more secure technology is desired
High durability cards for retransfer printing, lamination & fluorescent panel ribbon applications